Home > Shop > UPOL RAPTOR 1K MULTI-USE PROTECTIVE COATING 450ML – BLACK

UPOL RAPTOR 1K MULTI-USE PROTECTIVE COATING 450ML – BLACK

£24.99 £20.83 (EX. VAT)

U-POL RAPTOR 1K Multi-Use Protective Coating is a durable black protective aerosol designed to provide a tough, textured finish on a wide range of prepared surfaces. Its single-component formula offers excellent abrasion resistance and protection against scratches, corrosion and water damage. Ideal for automotive repairs, vehicle trim, trailers, metal furniture and general protective coating applications.

6 in stock

5010796101299 SKU: RMUB/AL Categories: , ,

U-POL RAPTOR 1K Multi-Use Protective Coating – Black 450ml

Get durable surface protection with U-POL RAPTOR 1K Multi-Use Protective Coating. This convenient 450ml aerosol produces an attractive textured black finish designed to protect a variety of surfaces against impact, scratches, abrasion, corrosion and water damage.

Unlike the traditional 2K RAPTOR coating system, this is a ready-to-use 1K aerosol. There is no separate hardener to mix, making it particularly convenient for smaller jobs, touch-ups and areas where a spray gun is not practical.

Its clog-free nozzle and easy aerosol application make it suitable for automotive, workshop and general maintenance applications.

Key Features and Benefits

  • Ready-to-use 1K formula: No separate hardener or mixing required.
  • Tough textured finish: Creates RAPTOR’s distinctive protective surface.
  • Abrasion resistant: Helps protect surfaces against everyday wear.
  • Scratch and impact resistant: Provides a durable protective coating.
  • Corrosion resistance: Helps protect suitable prepared metal surfaces.
  • Water resistance: Helps protect surfaces against water damage.
  • Excellent adhesion: Designed for properly prepared metal, aluminium, fibreglass, plastic and wood.
  • Clog-free nozzle: Designed for convenient, consistent aerosol application.
  • UV resistance: Textured finish designed to resist fading from sunlight.

Typical Applications

U-POL RAPTOR 1K Multi-Use is suitable for a variety of automotive, workshop and general protective coating applications, including:

  • Automotive trim and bodywork details
  • Vehicle restoration and repair work
  • Trailers and metal components
  • Railings and gates
  • Stairs and steps
  • Metal furniture
  • Workshop equipment
  • Prepared plastic and fibreglass components
  • Wood and other suitable surfaces

Suitable Surfaces

RAPTOR 1K Multi-Use Protective Coating can be applied to properly prepared:

  • Steel
  • Aluminium
  • Prepared original equipment manufacturer (OEM) paint
  • Fibreglass
  • SMC
  • Suitable plastics
  • Wood

Always follow the manufacturer’s preparation instructions for the particular substrate. It is not recommended for application over thermoplastic acrylics.

Product Specifications

  • Brand: U-POL RAPTOR
  • Product: 1K Multi-Use Protective Coating
  • Product Code: RMUB/AL
  • Size: 450ml aerosol
  • Colour: Black
  • Finish: Textured
  • Type: Single-component (1K) protective coating
  • Application: Aerosol spray
  • Mixing: Ready to use – no hardener required

Application Instructions

  1. Thoroughly clean, degrease and prepare the surface according to the manufacturer’s instructions.
  2. Shake the aerosol for at least 2 minutes before use.
  3. Hold the can approximately 30cm from the surface.
  4. Apply 1–2 light, even coats.
  5. Allow approximately 10–15 minutes flash-off between coats at 20°C.

For optimum results, U-POL recommends 1–2 light coats of RAPTOR Acid Etch Primer on appropriate metal surfaces, allowing 20 minutes drying time before applying the coating. Suitable plastics should be treated with an adhesion promoter.

Drying Times and Coverage

At approximately 20°C:

  • Touch dry: Less than 60 minutes
  • Dry through: 3–4 hours
  • Overcoating: 3–4 hours
  • Flash-off between coats: 10–15 minutes
  • Theoretical coverage: Approximately 0.8–1m² per aerosol

Actual coverage and drying times depend on film thickness, temperature, humidity and application conditions.

Why Buy U-POL RAPTOR from SIA Agencies?

SIA Agencies supplies professional automotive refinishing products to bodyshops, motor factors and trade customers across Northern Ireland and the UK.

We stock a range of U-POL products, including RAPTOR protective coatings, primers, fillers and bodyshop consumables.

Order U-POL RAPTOR 1K Multi-Use Protective Coating Black 450ml from SIA Agencies.

 

U-POL RAPTOR 1K Multi-Use Protective Coating FAQs

What is U-POL RAPTOR 1K Multi-Use used for?

It is a versatile protective coating for automotive parts, trailers, railings, metal furniture, workshop equipment and other suitable surfaces.

Does RAPTOR 1K Multi-Use need a hardener?

No. It is a single-component ready-to-use aerosol. No separate hardener or mixing is required.

What size is the RAPTOR 1K Multi-Use aerosol?

This product is supplied in a 450ml aerosol can.

What colour is this RAPTOR aerosol?

This version is black and dries to a textured finish.

What surfaces can RAPTOR 1K Multi-Use be applied to?

It is designed for properly prepared steel, aluminium, OEM paint, fibreglass, SMC, suitable plastics and wood.

How long does RAPTOR 1K take to dry?

At approximately 20°C, it is touch dry in less than 60 minutes and dry through in around 3–4 hours. Actual times vary with conditions and film thickness.

How much area does one can cover?

U-POL specifies theoretical coverage of approximately 0.8–1m² per aerosol, depending on application and film thickness.

Can RAPTOR 1K Multi-Use be painted over?

Yes. U-POL states that it can be directly overcoated without sanding with most water-based and solvent-based paint systems after approximately 3–4 hours at 20°C.

You may also like…