U-POL B Fibreglass Bridging Compound – UPOLB/2 & UPOLB/4
U-POL B Fibreglass Bridging Compound is a strong, glass-fibre reinforced polyester filler developed for repairing holes, rust damage and damaged areas in automotive bodywork.
Designed for demanding repair work, U-POL B offers excellent gap-filling properties and cures to form a tough, durable surface that can be shaped and sanded to match the surrounding panel.
Its water-resistant properties when fully cured make it particularly useful for repairs where a strong reinforced base is required before applying standard polyester body filler.
Key features and benefits
- Glass-fibre reinforced: Provides a strong, tough repair compound for damaged panels.
- Excellent gap filling: Designed to bridge holes and larger areas of panel damage.
- Rust repair applications: Suitable for bridging holes and rust damage in steel surfaces.
- GRP compatibility: Can be used on glass-reinforced plastic surfaces.
- Water resistant: Resistant to water once fully cured.
- Sandable and shapeable: Can be worked to achieve the required repair profile.
- Easy to finish: Can be covered with standard polyester body filler for a smoother final finish.
Typical applications
U-POL B is designed for automotive repair applications including:
- Bridging holes in damaged vehicle panels
- Repairing rust-affected steel panels
- Filling larger areas of bodywork damage
- Repairs to fibreglass and GRP surfaces
- Reinforcing damaged areas before applying finishing filler
- Automotive restoration and body repair work
Suitable surfaces
U-POL B is suitable for application to properly prepared:
- Bare steel
- Aluminium
- Original paintwork, excluding thermoplastic acrylics
- Fibreglass and GRP
- SMC surfaces
- Existing body filler
Always follow the manufacturer’s substrate preparation instructions before application.
Product preparation and application
U-POL B is a two-component polyester compound and must be mixed with the appropriate BPO hardener before use.
Mixing ratio:
The hardener percentage depends on the working temperature:
- At 10°C: 5% hardener
- At 20°C: 4% hardener
- At 30°C: 3% hardener
Mix thoroughly on a suitable mixing board, following the current U-POL technical data sheet.
Working and sanding times:
- Working time at 10°C: approximately 6–7 minutes
- Working time at 20°C: approximately 4–6 minutes
- Working time at 30°C: approximately 4 minutes
- Sanding at 20°C: approximately 15–20 minutes
Initial sanding: P80–P120
Final sanding: P180–P240
These are typical manufacturer figures and will vary with temperature and working conditions.
Available sizes and product codes
U-POL B is available in two sizes:
UPOLB/2 – 1 Litre
- Product code: UPOLB/2
- Tin size: 1 litre
- Colour: Yellow
UPOLB/4 – 1.85 Litre
- Product code: UPOLB/4
- Tin size: 1.85 litres
- Colour: Yellow
Buy U-POL B Fibreglass Bridging Compound from SIA Agencies
SIA Agencies supplies professional U-POL automotive refinishing products to bodyshops, motor factors and trade customers across Northern Ireland and the UK.
Order U-POL B Fibreglass Bridging Compound in 1L or 1.85L from SIA Agencies for professional vehicle body repairs and fibreglass applications.
Frequently Asked Questions
What is U-POL B Fibreglass Bridging Compound used for?
U-POL B is a glass-fibre reinforced polyester filler used to bridge holes and repair rust damage in steel and GRP surfaces.
Can U-POL B be used to repair rust holes?
Yes. It is designed for bridging holes and rust damage in steel panels as part of a properly prepared body repair.
Is U-POL B suitable for fibreglass repairs?
Yes. It is suitable for GRP and fibreglass surfaces, making it useful for automotive and other fibreglass repair work.
Is U-POL B waterproof?
U-POL describes the product as water resistant once fully cured.
Can U-POL B be sanded?
Yes. Once cured, it can be shaped and sanded. U-POL recommends initial sanding with P80–P120 and final sanding with P180–P240.
Can you apply normal body filler over U-POL B?
Yes. U-POL B is designed to be easily covered with standard polyester body filler to achieve a smoother finishing surface.
What is the mixing ratio for U-POL B?
The hardener percentage depends on temperature: 5% at 10°C, 4% at 20°C and 3% at 30°C. Follow the current technical data sheet.
What is the difference between UPOLB/2 and UPOLB/4?
Both contain the same U-POL B Fibreglass Bridging Compound. UPOLB/2 is the 1-litre tin, while UPOLB/4 is the larger 1.85-litre tin.
How long does U-POL B take to sand?
At 20°C, U-POL gives a typical sanding time of approximately 15–20 minutes. Actual times depend on temperature and application conditions.
Which hardener is used with U-POL B?
U-POL B uses a compatible BPO polyester filler hardener. Follow the manufacturer’s technical data sheet for the correct quantity.


