U-POL ISOPON P40 Fibreglass Body Filler – 250ml / 1.85L
U-POL ISOPON P40 is a professional fibreglass-reinforced polyester filler designed for repairing holes, rust damage and damaged areas in automotive bodywork.
Its reinforced formulation provides a strong, durable repair compound with excellent gap-filling properties. Once cured, P40 forms a hard surface that can be sanded and shaped to match the surrounding panel.
It is particularly useful for bridging holes in damaged vehicle panels before applying standard polyester body filler to achieve a smooth, professional finish.
Key features and benefits
- Fibreglass reinforced: Provides additional strength for demanding repair applications.
- Excellent gap filling: Designed to bridge holes and larger areas of panel damage.
- Rust repair applications: Ideal for repairing rust-affected vehicle panels.
- Hard and durable: Cures to form a tough surface that can be shaped and sanded.
- Water resistant: Resistant to water once fully cured.
- Easy to finish: Can be covered with standard polyester body filler.
- Versatile repair compound: Suitable for automotive steel and GRP repairs.
Typical applications
U-POL P40 is designed for automotive body repair applications, including:
- Bridging holes in damaged vehicle panels
- Repairing rust holes in steel bodywork
- Repairing damaged wheel arches and body panels
- Filling larger areas of panel damage
- Fibreglass and GRP repair work
- Automotive restoration and bodywork repairs
U-POL describes P40 as suitable for repairing holes up to approximately 75mm wide in most types of metal, when used in accordance with its application instructions.
Suitable surfaces
P40 is designed for use on properly prepared surfaces, including:
- Bare steel
- Aluminium
- Original paint surfaces, excluding thermoplastic acrylics
- GRP and fibreglass surfaces
Always follow the manufacturer’s preparation instructions and check substrate suitability before application.
Mixing and application
U-POL P40 is a two-component polyester filler that requires the appropriate BPO polyester hardener.
Mixing guidance:
The manufacturer’s technical information specifies approximately 3–4 parts hardener by weight per 100 parts P40.
At approximately 20°C, the typical working time is 4–5 minutes using 4% hardener.
Application process:
- Remove rust, dirt and loose material from the repair area.
- Degrease and abrade the surface as directed in the technical data sheet.
- Mix P40 thoroughly with the correct quantity of polyester hardener.
- Apply to the prepared repair area using a suitable spreader.
- Allow to cure before sanding and shaping.
- Apply standard polyester body filler if a smoother finishing surface is required.
Typical drying time:
At 20°C, P40 is typically ready for sanding after approximately 20 minutes.
Working and drying times vary with temperature and hardener quantity. Always follow the current manufacturer’s technical data sheet.
Available sizes and product codes
U-POL P40/S – 250ml
- Product code: P40/S
- Tin size: 250ml
- Ideal for smaller repairs and occasional bodywork jobs.
U-POL P40/4 – 1.85 Litres
- Product code: P40/4
- Tin size: 1.85 litres
- Suitable for larger repairs and regular workshop use.
Buy U-POL P40 Fibreglass Body Filler from SIA Agencies
SIA Agencies supplies professional U-POL automotive refinishing products to bodyshops, motor factors and trade customers across Northern Ireland and the UK.
Order U-POL ISOPON P40 Fibreglass Body Filler in 250ml or 1.85L from SIA Agencies for professional vehicle body repairs.
Frequently Asked Questions
What is U-POL P40 Fibreglass Filler used for?
U-POL P40 is a glass-fibre reinforced polyester filler used to bridge holes and repair rust damage in vehicle body panels and other suitable surfaces.
Can U-POL P40 repair rust holes?
Yes. P40 is designed for bridging holes in damaged and rust-affected panels. All loose rust and unsuitable material must be removed and the surface properly prepared first.
What is the difference between U-POL P40 and normal body filler?
P40 contains reinforcing glass fibres and is designed for stronger gap-filling and bridging repairs. Standard polyester body filler is generally used afterwards to achieve a smoother surface.
Can U-POL P40 be sanded?
Yes. Once fully cured, P40 can be sanded and shaped before applying finishing filler or following the appropriate refinishing process.
Is U-POL P40 waterproof?
U-POL describes P40 as water resistant when fully cured.
Can you put normal body filler over U-POL P40?
Yes. P40 is designed to be covered with standard polyester body filler to create a smoother finish.
What hardener is used with U-POL P40?
P40 requires a compatible BPO polyester filler hardener. Follow the manufacturer’s technical data sheet for the correct mixing quantity.
How long does U-POL P40 take to dry?
At approximately 20°C, the published technical information gives a typical sanding time of around 20 minutes. Temperature and hardener quantity affect curing time.
What is the difference between P40/S and P40/4?
Both contain U-POL ISOPON P40 Fibreglass Body Filler. P40/S is the 250ml tin, while P40/4 is the larger 1.85-litre tin.
Can U-POL P40 be used on fibreglass?
Yes. P40 is suitable for GRP and fibreglass repair applications, subject to correct surface preparation.




