Home > Shop > U-POL Extra Stopper Fine Finishing Filler 750ml – UPEF/M

U-POL Extra Stopper Fine Finishing Filler 750ml – UPEF/M

£24.99 £20.83 (EX. VAT)

U-POL Extra Stopper Fine is a professional quick-setting polyester finishing filler designed for filling small holes, scratches and surface imperfections before painting.

Its soft, smooth consistency makes it easy to spread in thin layers, producing an excellent fine finish with minimal sanding. Ideal for professional automotive bodyshops and vehicle repair specialists looking to achieve a smooth, high-quality surface ready for priming and painting.

Key Features:

  • Fine finishing polyester stopper
  • Quick-setting formula
  • Ideal for small holes and surface imperfections
  • Smooth, easy-spreading consistency
  • Designed for application in thin layers
  • Easy to sand
  • Suitable for wet or dry sanding
  • Suitable for a range of automotive substrates
  • Ideal for final preparation before painting

Supplied in a 750ml tin.

Categories: , , Tag:

U-POL Extra Stopper Fine Finishing Filler – 750ml

U-POL Extra Stopper Fine is a professional quick-setting polyester finishing filler designed to eliminate small holes, scratches and minor surface imperfections in automotive bodywork before painting.

Formerly known as U-POL Top Stop Extra Fine, this smooth finishing stopper is formulated for easy application in thin layers, helping achieve an exceptionally smooth surface ready for priming and painting.

Its soft, creamy consistency makes it easy to spread and work with, while its excellent sanding properties help reduce preparation time in professional automotive refinishing applications.

Ideal for professional bodyshops, vehicle repair specialists and automotive restoration projects, U-POL Extra Stopper Fine is an excellent choice for the final finishing stage of body repairs.

Key Benefits of U-POL Extra Stopper Fine

  • Fine Finishing Formula: Designed for correcting small holes, scratches and minor surface imperfections.
  • Quick Setting: A fast-setting polyester formula helps speed up the body repair process.
  • Smooth Application: Soft, smooth consistency allows easy spreading in thin layers.
  • Easy Sanding: Can be sanded wet or dry to achieve a smooth finish.
  • Excellent Surface Preparation: Helps produce an even surface ready for priming and painting.
  • Professional Results: Ideal for the final finishing stage of automotive body repairs.
  • Versatile Application: Suitable for a variety of correctly prepared automotive substrates.

What Is U-POL Extra Stopper Fine Used For?

U-POL Extra Stopper Fine is designed for fine finishing applications in automotive body repair, including:

  • Filling small holes and imperfections in bodywork
  • Correcting minor scratches and surface defects
  • Smoothing previously repaired vehicle panels
  • Applying thin finishing layers over prepared body filler
  • Preparing panels for priming and painting
  • Final finishing work in professional bodyshops

Suitable Surfaces

U-POL Extra Stopper Fine can be used on correctly prepared surfaces, including:

  • Bare steel
  • Aluminium
  • Zinc-coated surfaces
  • Prepared original paint surfaces
  • Fibreglass / GRP
  • SMC panels
  • Lightly sanded E-coat

Always follow the manufacturer’s technical data sheet for substrate preparation and application instructions.

Product Specifications

Specification Details
Brand U-POL
Product Extra Stopper Fine
Product code UPEF/M
Size 750ml
Product type Quick-setting polyester finishing filler
Application Fine automotive bodywork repairs
Hardener BPO polyester filler hardener
Mixing ratio 2% at approximately 20°C
Pot life Approximately 5–6 minutes at 20°C
Sanding time Approximately 20 minutes at 20°C
Sanding Wet or dry
Overpainting Suitable for most common paint systems, including 2K

Application Information

U-POL Extra Stopper Fine is a two-component polyester finishing filler that must be mixed with BPO polyester hardener before application.

At approximately 20°C, the recommended mixing ratio is 2% hardener by weight, giving a working time of approximately 5–6 minutes.

For best results:

  • Clean and degrease the repair area thoroughly.
  • Prepare the substrate using the recommended abrasive grade.
  • Mix thoroughly with the correct amount of BPO hardener.
  • Apply in thin, even layers.
  • Allow to cure before sanding.
  • Sand to achieve the required smooth finish before priming and painting.

At approximately 20°C, typical sanding time is 20 minutes.

Always consult the manufacturer’s technical data sheet for full application instructions.

Buy U-POL Extra Stopper Fine from SIA Agencies

SIA Agencies supplies professional automotive refinishing products to bodyshops, motor factors and vehicle repair specialists across Northern Ireland and the UK.

We stock a wide range of U-POL body fillers, finishing stoppers, primers, adhesives and automotive refinishing consumables.

Order U-POL Extra Stopper Fine Finishing Filler 750ml online from SIA Agencies for professional-quality automotive repair and refinishing supplies.

 

Frequently Asked Questions

What is U-POL Extra Stopper Fine used for?

U-POL Extra Stopper Fine is a quick-setting polyester finishing filler used to fill small holes, scratches and minor surface imperfections in automotive bodywork before painting.

What is the difference between U-POL Extra Stopper Fine and P38?

P38 is a multi-purpose body filler designed for filling and shaping dents and damaged panels. Extra Stopper Fine is designed for the final finishing stage, correcting small holes and imperfections to achieve a smoother surface.

Does U-POL Extra Stopper Fine need hardener?

Yes. It is a two-component polyester finishing filler which must be mixed with BPO polyester hardener before application.

What is the mixing ratio for U-POL Extra Stopper Fine?

At approximately 20°C, the recommended mixing ratio is 2% BPO hardener by weight.

How long does U-POL Extra Stopper Fine take to dry?

At approximately 20°C, it can typically be sanded after 20 minutes. Actual curing times depend on temperature and mixing conditions.

Can U-POL Extra Stopper Fine be sanded wet or dry?

Yes. The product can be sanded either wet or dry to achieve the required smooth finish.

Can U-POL Extra Stopper Fine be painted over?

Yes. Once properly cured and prepared, it can be overpainted with most common automotive paint systems, including 2K systems.

What size is U-POL Extra Stopper Fine available in?

The UPEF/M version is supplied in a 750ml tin.

Was U-POL Extra Stopper Fine previously called Top Stop?

Yes. U-POL Extra Stopper Fine was formerly known as Top Stop Extra Fine.

You may also like…

Price range: £22.99 through £49.99